Line spacing cannot be adjusted. Put the card in the card frame and fix it. Move the frame and choose the position what you need. Write the daisy characters plate , use the pointer to choose the characters you need.After doing step 13, jolt the hand-haft. If the embossment depth is out fit what you need, you can adjust the bolt in adjusting hole at the bottom of machine. You can use 4th inner hexagon spanner to untie the bolt, and then use 8th outer hexagon spanner to untie outer bolt, after adjusting, please screw the bolt. Please use the PVC card(85mm x 55mm) CR-80 standard. When turning the characters plate, please don't drop down the hand-haft.
When switch the embossment size, please ward off the card frame slightly to avoid damage. Never put hand or other hard objects into the machine. Please move the card frame to the left end when not using the machine.
If the imprinted character may be deeper or shallower, undesirable, then it can be adjusted by adjusting screw in the regulation. Use the Z outside-hexagonal spanner along with the code sprinter to a little loose the hold-down nut, and then inside-hexagonal spanner with the code sprinter to adjust the middle regulating screw. Turning the regulating screw in clockwise may deepen the typed characters while clockwise turning may lighten the typed characters. After finishing, please use the inside-hexagonal spanner with the code sprinter to make the regulating srcew stable, and then use the Z outside-hexagonal spanner to fasten the hold-downscrew.Due to the effort saving design, please do not pull the lever too hard during your operation in order to protect the machine. Manual PVC Card Embossing Machine. 1 Correcting Characters For Error Correction. Adjustable Kerning, 7,10 Characters Per Inch. Indicator and Sample Card For Raised Type Location Indication. Easy to Use with No Skilled Training Required, Just Turn the dial to the Character you Want and Pull the Lever. Character depth can be adjusted to users specifications by adjusting portion located towards the bottom of the machine Hardware is included.
Applies workpiece:Normative PVC card, That be 85.5mm × 55mm. Raised type lines:1-11 lines. 2 gears for word spacing gap:1/7 inch; 1/10 inch (only for small characters).
Raised type location indication:Indicator or sample card. Capitalization case of English letters (26)AZ. Capitalization & Lower Arabic numerals (20)09. Small symbols (8)'& /.
1 x PVC Card Embossing Machine. 1 x Handle Fastening Screw. 1 x Sample PVC Card. 1 x Set of Hardware.
1 x User's Manual. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders.
Caifornia Warehouse: 18501 Arenth Ave, City of Indus-try, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault. A: The item ships from Rancho Cucamonga, CA, United States.A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item "Update 72-Character New PVC Manual Credit Card Embossing Machine Embosser" is in sale since Tuesday, December 3, 2013.
This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Stamping & Embossing". The seller is "technology-zoom" and is located in Houston, Texas.
This item can be shipped worldwide.