How to use this machine. Put the card in the card frame and fix it. Move the frame and select the position of what you need 2. Write a daisy letter plate and use pointers to select the letters you need. After performing steps 1 to 3, shake the handle by hand.UNTIE Bolts on the outer bolts, use 8 to untie the outer hex wrench 5. Use PVC card (85mm x 55mm) CR-80 standard. When turning the letter plate 2., do not drop down the handle by hand. Switch the emboss size and repel the card frame a little to avoid damage. Do not place your hands or other hard objects on the machine. When not using the machine 5. Move the card frame to the left end. If the engraved letters are deep or shallow and may not be desirable, it can be adjusted by adjusting the adjusting screw. Note: A clockwise turn can reduce the input characters. After finish but can deepen the input characters Turn the adjustment screw clockwise and use a cord sprinter and inner hexagon spanner to create an adjustment srcew stability And then use Z outside-the hexagonal wrench holds the hold down screw. The item "72 characters manual embossing machine credit card PVC card stamping machine CA" is in sale since Monday, October 26, 2020. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Stamping & Embossing". The seller is "dalishilock" and is located in WENZHOU.
This item can be shipped worldwide.