Write a daisy letter plate and use pointers to select the letters you need. After performing steps 1 to 3, shake the handle by hand. UNTIE Bolts on the outer bolts, use 8 to untie the outer hex wrench 5.
Use PVC card (85mm x 55mm) CR-80 standard. When turning the letter plate 2., do not drop down the handle by hand. Switch the emboss size and repel the card frame a little to avoid damage.
Do not place your hands or other hard objects on the machine. When not using the machine 5.
Move the card frame to the left end. If the engraved letters are deep or shallow and may not be desirable, it can be adjusted by adjusting the adjusting screw. Note: A clockwise turn can reduce the input characters. After finish but can deepen the input characters Turn the adjustment screw clockwise and use a cord sprinter and inner hexagon spanner to create an adjustment srcew stability And then use Z outside-the hexagonal wrench holds the hold down screw. Contains the following 72 characters. Capitalization case of English letters (26): AZ. Capitalization & Lower Arabic numerals (20): 09.Small symbols (8):'& /. Card customization machineget it and make your Unique card. The item "72Letter Manual Embosser Machine Card printer For credit card PVC/ID/Credit Card" is in sale since Wednesday, November 4, 2020. This item is in the category "Business\Printing Equipment\Other". The seller is "susemse-us" and is located in wenzhou.
This item can be shipped worldwide.